Sensormatic Intellex Betriebsanleitung PDF herunterladen (Seite 141)

Intellex RMS Digital Video Management System

Setup Options 125

AUDIO OPTION

The Audio option allows you to set the output volume and record volume for audio

stream.

NOTE: You must possess the Setup Audio privilege to access this screen

Audio Mixer Tab

Under Volume use the slider controls to set the output level for Playback, and set the

output level for Live audio, for a Line In or Microphone source.

Click the Mute button to disable Playback or Live audio for that source.

Then under Record specify the audio source, either Line In or Microphone.

Use the Record Level slider control on the right to set the recording level.

Under Record, select None to disable audio recording. To add an input boost of 20 dB

to the audio signal strength, click the Mic Boost button.

NOTE: Mic needs to be the selected source to use Microphone Boost.

Audio Mixer Use this tab to set up Audio recording via a Line In or

Microphone source.

Volume Playback Playback audio is audible when

playing back recorded video. The

mute button will disable all

playback audio.

Live Live video is audible when viewing

live video. The mute button will

disable all live audio.

Record Sets the source of the audio, None, Line In, or Mic

(microphone). If None is selected, no audio is recorded.

Vol ume Controls the recording input

volume. The level should be

adjusted to provide adequate

volume without distortion.

Camera

Associations

Select one or more cameras to be associated with the

audio stream.

NOTE: Audio must be associated with at least one

camera to be recorded.

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 237 238

Keine Kommentare

Sensormatic Intellex Betriebsanleitung Seite 141