Sensormatic Intellex Betriebsanleitung PDF herunterladen (Seite 23)

Intellex RMS Digital Video Management System

Introduction 7

ACCESSORIES

Intellex USB Floppy Drive

The USB floppy drive can be used to save Intellex configurations, single .BMP images

from the image tools feature, and to install software patches and upgrades.

Intellex USB CD-RW Drive

The USB CD-RW drive can be used to export video clips to CD-R or CD-RW disks or

to update the Intellex software.

Intellex USB/RS-232 4- and 8-Port Expanders

The 4- and 8-Port Expanders can be used to add serial ports to the Intellex for the

recording of text data.

Intellex Speakers

The speakers can be used to listen to recorded audio information or to monitor live

audio activity.

Dome Control

Camera control can take place locally on the Intellex system, at the Touch Tracker, or

remotely at a Network Client workstation. Refer to the Network Client Installation and

Operating Instructions for details. Concurrent local and remote operation can cause

control conflicts. The camera will respond to the last control action performed,

whether that is at the Touch Tracker or at the Network Client. If another user tries to

control the same camera, unexpected actions of the camera may result.

Use of the Touch Tracker version 2.x firmware can minimize control conflicts. This

firmware permits concurrent control of two different cameras connected to the same

Touch Tracker, one locally and one remotely. Conflicts can still occur if the same

camera is being controlled.

Hard Disks

Three hard disk array types are available for the Intellex RMS.

• Six 120GB disks, for a total of 720GB of storage capacity.

• Six 160GB disks, for a total of 960GB of storage capacity.

• Six 250GB disks, for a total of 1500GB (1.5 terabytes) of storage capacity.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 237 238

Keine Kommentare

Sensormatic Intellex Betriebsanleitung Seite 23