Sensormatic Intellex Betriebsanleitung PDF herunterladen (Seite 208)

Installation and Operating Instructions

192 Installation and Use of Accessories

USB Floppy Drive-RDVFLP01

The Intellex USB floppy drive can be used to save Intellex configurations, single .bmp

images from the image tools feature, and to install software patches and upgrades.

Installation

Insert the USB cable of the floppy drive into one of the USB connectors in the rear of

the Intellex. It is not necessary to exit Intellex. The unit will recognize the new device

and a New Hardware Found message will appear briefly. The drive is ready to use.

USB CD-RW Drive-RDVCDRX01

The Intellex USB CD-RW drive can be used to export video clips to CD-R or CD-RW

disks or to update the Intellex software.

NOTE: Do not disconnect the CD-RW while an export is in progress. The data will be

lost and the media will be ruined.

Installation

Insert the USB cable of the floppy drive into one of the USB connectors in the rear of

the Intellex. It is not necessary to exit Intellex. The unit will recognize the new device

and a New Hardware Found message will appear briefly. The drive is ready to use.

After installation you can connect and disconnect (“hot swap”) the USB CD-RW drive

from the unit without exiting the Intellex application.

USB/RS-232 Single COM Port Adapter

Connect the device to a USB port. The unit will recognize the device and a Files

Needed window then appears. Click on the Browse button, and in the Locate File

window use the Look In dropdown list to go to C:\winnt\system32\drivers; then

click the Open button and select OK in the Files Needed window. If the unit does not

locate the driver for the “Iogear USB COM Port”, you may have to reload the driver.

The driver files can be found by double-clicking on My Computer and going to

C:\Drivers\Iogear\GUC232A\WIN2000.

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 237 238

Keine Kommentare

Sensormatic Intellex Betriebsanleitung Seite 208